**6 Mat Special** 6 x Stable Horse Floor Matting EVA 24mm Interlocking Mats

• 6 Mats
• 24mm Thick
• Interlocking Sides
• Removable Edge Strips
• Cushioned EVA Stable Mats for Horse Comfort and Easier Floor Fitting

Interlocking EVA Stable Matting for Practical Horse Flooring

Stable flooring should be comfortable for the horse and manageable for the person maintaining it. This 6 pack of EVA stable horse floor mats is designed for stable areas where a cushioned surface, easier handling, and a more secure floor layout are important.

Each mat measures 6ft x 4ft, with a 24mm thickness that provides a softer layer over hard stable floors. The mats interlock along the two 6ft sides and include removable edge strips, helping create a cleaner layout where the connected sides meet. The two 4ft ends are straight edged, so they do not interlock.

Why 24mm EVA Works Well for Stable Floors

EVA is a lightweight cushioned material that is commonly chosen for stable flooring because it is easier to lift and position than many heavier floor mats. This can make installation, adjustment, and occasional cleaning underneath more practical.

The 24mm thickness gives a useful balance between cushioning and everyday usability. It helps reduce direct contact with cold, hard concrete while still allowing the floor to remain stable and practical for daily stable use.

Interlocking Design and Floor Layout

Interlocking Along the Long Sides

The mats are designed to interlock along the two 6ft sides. This can help reduce separation between adjoining mats when they are positioned correctly, giving the stable floor a more connected finish across the main layout.

The removable edge strips allow the outer sides to be finished more neatly where required. This is useful when planning a stable floor that needs a cleaner edge against open areas or visible sections.

Straight Edges on the Short Ends

The two 4ft ends are straight edged and do not interlock. This is important to understand before fitting, especially when planning how the mats will sit inside the stable. Measuring the stable carefully and planning the direction of the interlocking sides can help avoid fitting issues.

A clear layout plan before installation will make the floor easier to align and reduce unnecessary cutting or repositioning.

Cushioned Support for Horses and Ponies

A hard stable base can feel cold and uncomfortable, especially when horses spend long periods standing indoors. The cushioned EVA surface helps create a more forgiving floor layer beneath bedding, supporting a more comfortable stable environment.

The matting may also help reduce reliance on excessive bedding, depending on the horse, stable condition, drainage, and care routine. It should still be used as part of a complete stable setup with suitable bedding, ventilation, and regular cleaning.

Drainage Support and Stable Hygiene

The top surface has a textured finish designed for stable use, while the underside includes raised sections that support drainage. This can help manage moisture beneath the mats when they are installed over a suitable base.

Good stable hygiene still depends on regular mucking out, correct bedding, drainage, and cleaning. The non-absorbent EVA surface makes routine maintenance more manageable, but the floor underneath should still be checked and cleaned when needed.

Fitting Guidance for EVA Stable Mats

EVA mats can expand slightly when weight is applied, so they should not be fitted tightly against all stable walls. A gap of around 1cm to 2cm should be left around at least two sides. This gives the mats space to settle under pressure and helps reduce the risk of lifting, curling, or pushing against each other.

The stable base should be clean, level, and suitable before installation. After fitting, the mats should be checked once the horse has used the stable to make sure the floor remains flat and properly aligned.

Product Specifications

• Condition: New
• Material: EVA
• Type: Stable Matting
• Pack Size: 6 Mats
• Mat Size: 6ft x 4ft / 1.82m x 1.22m
• Thickness: 24mm
• Interlocking: Along Two 6ft Sides
• Short Ends: Straight Edged
• Edge Detail: Removable Edge Strips
• Surface: Textured Stable Surface
• Underside: Raised Sections to Support Drainage
• Cushioned: Yes
• Lightweight: Yes
• Use: Horse and Pony Stable Flooring
• MPN: Does Not Apply
• EAN: 0641022826379
• Country of Origin: China

Frequently Asked Questions

Do these mats interlock on all four sides?

No, these mats interlock along the two 6ft sides only. The two 4ft ends are straight edged and do not interlock. This should be considered before fitting so the layout can be planned correctly inside the stable.

What are the removable edge strips used for?

The removable edge strips help create a cleaner finish around exposed sides where needed. They can be useful when completing the edge of a stable floor layout or when a neater outside line is preferred.

Are these mats suitable for horse stables?

Yes, these EVA mats are suitable for horse and pony stable flooring. The 24mm cushioned construction helps create a softer surface over hard bases and can improve comfort when used with appropriate bedding and stable care.

How many mats are included in this pack?

This listing includes 6 mats. Each mat measures 6ft x 4ft, which makes the pack suitable for many standard stable layouts. A 12ft x 12ft stable commonly uses 6 mats, but measuring the exact floor area is recommended.

Do EVA stable mats need an expansion gap?

Yes, EVA mats should not be fitted tightly against every wall. A gap of around 1cm to 2cm should be left around at least two sides so the mats have space to settle when weight is applied.

Can these mats help reduce bedding use?

They may help reduce the amount of bedding needed because the cushioned EVA layer improves the base floor surface. Bedding use still depends on the horse, drainage, stable routine, and personal care preference.

How should these mats be cleaned?

Routine cleaning can include mucking out, sweeping, washing, and disinfecting when needed. If the mats are lifted, the floor underneath should be cleaned and allowed to dry before the mats are placed back.