Horse Anti Cast Strips Stable Horsebox EVA Non Slip 34mm / 44mm 6ft / 1.8M Long

• EVA Strip
• 6ft Length
• Non-Slip Surface
• 34mm or 44mm Thickness
• Stable and Horsebox Wall Protection Strip

EVA Anti-Cast Support for Stable and Horsebox Walls

Anti-cast strips are used in stables and horseboxes to give horses extra surface contact and support where wall grip matters. When a horse lies too close to a wall or struggles to regain footing, a raised EVA strip can provide a more practical contact point than a flat wall surface.

These EVA strips are suitable for stable walls, partitions, and horsebox areas where a cushioned, non-slip surface is needed. The 6ft length makes each strip practical for common fitting areas, while the choice of 34mm or 44mm thickness allows the setup to be matched more closely to the space and level of support required.

Why EVA Works Well for Anti-Cast Areas

EVA is lightweight, cushioned, and easier to handle than many heavier floor or wall protection materials. This makes fitting more manageable, especially when strips need to be positioned along stable walls or inside a horsebox.

The cushioned structure helps create a softer surface than bare timber, metal, or blockwork. In daily use, this can be useful where horses may lean, brush against the wall, or need extra grip when adjusting their position.

Choosing Between 34mm and 44mm Thickness

The 34mm option is suitable where a lower-profile strip is preferred while still offering cushioning and raised surface support. It works well in stable areas where wall protection is needed without adding too much projection.

The 44mm option provides a thicker raised profile, which may be preferred where more pronounced contact support is required. The best choice depends on the horse, wall type, stable layout, and how the strip is being used within the space.

Non-Slip Surface for Practical Use

Stable and horsebox environments can involve moisture, bedding dust, and regular movement. A non-slip surface helps improve contact when pressure is applied against the strip. This is especially important in anti-cast situations, where a smooth wall surface may not provide enough resistance.

The strip is designed to be practical rather than decorative. Its purpose is to add a functional, cushioned contact surface in areas where horses may need extra wall grip and protection.

Fitting and Placement Guidance

Correct placement is important. Anti-cast strips are usually positioned along stable walls at a height and location suitable for the horse and the stable layout. The surface should be clean, dry, and structurally suitable before fitting.

Because every stable and horsebox setup is different, placement should be planned carefully before installation. The strip should sit securely against the wall and should not create sharp edges, loose areas, or gaps that could interfere with daily use.

Cleaning and Long-Term Care

The EVA surface can be wiped or washed clean as part of regular stable maintenance. Routine cleaning helps remove dirt, bedding residue, and general marks from daily use.

For best results, inspect the strips regularly to make sure they remain securely fitted and free from damage. Stable and horsebox fittings should always be checked as part of normal animal safety routines.

Product Specifications

• Condition: New
• Material: EVA
• Type: Stable and Horsebox Anti-Cast Strip
• Thickness Options: 34mm or 44mm
• Length: 6ft / 1.8m
• Width: 5in / 13cm
• Weight: Approx. 2kg per strip
• Surface: Non-Slip
• Urine Resistant: Yes
• Cleaning Instructions: Wipe / Wash Clean
• Suitable For: Stable Walls and Horsebox Areas
• MPN: Does Not Apply
• Country of Origin: China

Frequently Asked Questions

What are horse anti-cast strips used for?

Horse anti-cast strips are fitted to stable or horsebox walls to provide a raised contact surface. They are commonly used to help horses gain better wall grip and support if they lie close to a wall or need extra leverage when adjusting position.

Are these strips suitable for horseboxes?

Yes, these EVA strips can be used in horsebox areas where cushioned wall protection and non-slip contact are needed. Correct fitting is important because horsebox surfaces, fixings, and available wall space can vary.

What is the difference between 34mm and 44mm thickness?

The 34mm option provides a lower-profile cushioned strip, while the 44mm option gives a thicker raised surface. The right choice depends on the stable or horsebox layout, the horse’s size, and the level of wall support required.

Can the strips be washed clean?

Yes, the EVA surface can be wiped or washed clean. Regular cleaning is recommended to remove bedding dust, dirt, and marks from daily stable or transport use.

Are these strips non-slip?

Yes, the strips are designed with a non-slip surface to support better contact against the wall. This is useful in stable and horsebox environments where grip and surface protection are both important.

Where should anti-cast strips be fitted?

Placement depends on the stable layout and the horse’s needs. They are usually fitted along stable walls or horsebox panels where extra raised contact support is required. The surface should be secure, clean, and suitable before installation.

Are EVA strips heavy to handle?

No, EVA is relatively lightweight compared with many heavier protective materials. Each strip weighs approximately 2kg, making it manageable for fitting and positioning.