2 x Black 10mm 6ft x 4ft Wall Mat For Stables, Horses | EVA Matting

• 2 Pack
• 10mm Thick
• Black EVA Wall Mats
• 6ft x 4ft Stable Protection
• Suitable for Horses, Stables and Covered Equestrian Wall Areas

Soft EVA Wall Matting for Stable Protection

This 2 pack of black EVA stable wall mats is designed for equestrian spaces where wall protection, comfort, and easier handling are important. Each mat measures approximately 6ft x 4ft and is 10mm thick, giving useful coverage for stable wall areas where horses may come into contact with hard surfaces.

The EVA construction creates a softer barrier compared with bare timber, concrete, or hard wall panels. It is suitable for covered stable environments where a practical wall surface is needed for everyday animal care and stable management.

Designed for Stable Wall Use

These mats are intended for stable wall areas rather than gym or garage flooring. In a stable, horses may lean, brush, or rub against walls during normal movement, resting, or handling. A soft wall mat helps reduce direct contact with harder surfaces and creates a more forgiving wall section.

The 10mm thickness provides a useful protective layer without adding unnecessary bulk. This makes the mats easier to position and fit, especially in smaller stable spaces or areas where multiple wall sections need coverage.

Lightweight Handling and Fitting Guidance

EVA is lighter than many heavy rubber alternatives, making these mats easier to lift, carry, and position during installation. This is useful when fitting mats inside a stable, where space can be limited and accurate placement matters.

The mats should be fitted to a clean, stable wall surface using suitable fixings for the material underneath. Before installation, measure the wall area carefully and decide where protection is most needed.

Expansion Gap and Placement Advice

EVA can expand slightly when pressure and conditions change, so the mats should not be fitted tightly against every edge. Leaving a small gap of around 1cm to 2cm on at least two sides gives the material space to settle.

This helps reduce the risk of lifting, curling, or pressure between adjoining mats. The gap is especially important when fitting more than one mat close together across a wall area.

Cleaning and Everyday Maintenance

The mats can be cleaned as part of normal stable care. Removing dirt, dust, hair, and surface marks helps keep the wall area more manageable and suitable for regular use.

After fitting, check the mats periodically to make sure they remain secure and flat against the wall. This is particularly important in areas where horses regularly come into contact with the surface.

Product Specifications

• Condition: New
• Material: EVA
• Colour: Black
• Pack Size: 2 Mats
• Size per Mat: 6ft x 4ft
• Metric Size per Mat: 1.82m x 1.22m
• Thickness: 10mm
• Type: Stable Wall Mat
• Suitable For: Horses, Stables and Covered Equestrian Wall Areas
• Custom Bundle: No
• Modified Item: No
• MPN: Does Not Apply
• Country of Origin: United Kingdom

Frequently Asked Questions

How many mats are included in this pack?

This pack includes 2 black EVA stable wall mats. Each mat measures approximately 6ft x 4ft and is 10mm thick, making the pack suitable for covering selected stable wall sections.

Are these mats suitable for stable walls?

Yes, these mats are suitable for stable wall areas where a softer protective surface is needed. They can help create a more forgiving barrier between horses and hard wall surfaces.

Can these mats be used on the floor?

These mats are intended for wall use. For stable floors, thicker floor-specific matting is usually more suitable because floor areas carry direct hoof pressure and animal weight.

Are the mats easy to handle?

Yes, EVA is lightweight compared with many heavier matting materials. This makes the mats easier to lift, position, and fit during stable wall installation.

Do I need to leave a gap when fitting them?

Yes, a gap of around 1cm to 2cm should be left on at least two sides. EVA can expand slightly, and this space helps reduce the risk of lifting or curling.

What surface should they be fitted to?

They should be fitted to a clean, stable wall surface using suitable fixings for the structure underneath. The fixing method should match the wall material and expected level of contact.

How should these wall mats be cleaned?

They can be wiped or cleaned as part of regular stable maintenance. Removing dirt, hair, and surface marks helps keep the wall area practical and easier to manage.